• High speed disperser with clamping

    High speed disperser with clamping
     Application
    It can be used in industry of paints, coatings, cosmetics, food, resins, inks, adhesives, latex, medicine, oil, pesticides, daily chemical products, and related fields.
     Working principle
    High-speed Disperser is to dissolve, disperse and mix materials with different viscosity. Through the very high peripheral tip speed of the toothed disc, the strong shearing, crashing and friction forces generated between the materials and toothed disc disperse, dissolve and mix the materials efficiently. The large stress forces break down the agglomerates into the liquid or paste suspension.

     Introduction

    High speed disperser with clampingMain characteristic

    1.        Little air absorption during mixing and dispersing process.

    2.        It disperses and dissolves materials to smaller particle size efficiently.

    3.        No dead corner during mixing. Easy to clean, wide capacity range, various speed control,

    4.        Stable operation, low noise and long-time continuous operation.

    5.        This kind of disperser is with clamping for fixing the containers. It is easy operation and convenient. It is safer and more reliable than general High-speed Disperser.

    6.        With Floor type and Bench type.

    7.        Floor-type designed for mobile containers

    8.        Bench-type designed for fixed containers1-4 containers equipped

    9.        Explosion-proof motor for oil based materials, frequency controlled for the water-based,

    10.    Remote operation

    11.    Single-axis disperser matches with low-power motor; and High-power with two-axis.

    Power Supply:380V, 50/60Hz (Can be customized)

    Speed Adjustment:Frequency Converter

    Material:The part contacting with materials is SS304 or SS316L.

    Height adjustment:Hydraulic Lifting

    Clamping:Belt clamping, Manual rotation clamping, Pneumatic clamping, Electrical clamping.(Can be customized)

    Reference Parameter

    Models

    Power

    (kw)

    Speed

    (rpm)

    Capacity

       (L)

    Dispersed

        Diameter  

          (mm)

    Lifting Stroke

    (mm)

    Weight

       (kg)

    YT-HDC -1.5

    1.5

    0-1450

    ≤50

    150

    550

    120

    YT-HDC  -4

    4

    0-1450

    ≤200

    200

    800

    400

    YT-HDC  -7.5

    7.5

    0-1450

    ≤400

    230

    900

    600

    YT-HDC  -11

    11

    0-1450

    ≤500

    250

    900

    650

    YT-HDC  -15

    15

    0-1450

    ≤700

    280

    900

    700

    YT-HDC  18.5

    18.5

    0-1450

    ≤800

    300

    1100

    1000

    YT-HDC  -22

    22

    0-1450

    ≤1000

    350

    1100

    1200

    YT-HDC  -30

    30

    0-1450

    ≤1500

    400

    1100

    1400

     Notice
    * The above listed Max. processing capacity is calculated as per water as medium. The model selection should depend on the comprehensive factors such as materials viscosity, specific gravity etc. * If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection. *The above data and picture is subject to change without notice. The accurate parameter should be subject to the object. *Not all products are listed. For more, please contact with our sales engineer.
    Inquiry:(If immediate response needed, please call (86-28-62812181) or send e-mail to kf@yonton.com)
    Name 
    Tel 
    Content 
    ValidCode  Refresh


    Home | About Us | Products | Solutions | Contact | SiteMap
    ©1993-2010 YonTon.com
    在线无码视频观看草草视频